Produkty dla odzież kith (3)

Each panel is contained in a fabric lining suitable to protect from rays ultraviolet within the band of spectrum of 2,200 Armstrong. The outer lining is made of fabric 65% polyester 35% cotton, or CORDURA®. Easily adjustable and usable in each operational situation. Anti-crease and easily washable, this one feature comes from the ability to remove ballistic panels. WRITTEN:REMOVABLE LINING:CORDURA POLYESTER 65% COTTON 35% MATERIAL:KEVLAR DUPONT GOLD FLEX KEVLAR XP DYNEEMA TWAROM

Vertical sealing machines for hanging garments, suitable for packaging ironed garments such as jackets, shirts and suits. They can seal all types of bags between 400 and 700 mm in width and of any thickness. The machines carry out an impulse welding (the resistances heat up only during the welding). Welding times vary from a minimum of 0.6 sec. to a maximum of 1.2 sec. The sealing machines for hanging garments are available in the following versions: FPMM MANUAL MODEL The FPMM manual model only performs the upper sealing of the bags containing the garments. The bars are closed by manual command from the operator who acts on a lever located on the control panel. The bottom of the envelope remains open. FPMA/FPMA PLUS PNEUMATIC MODEL The FPMA model is more professional and robust and has a minicomputer that manages the functionality of the machine, from the safety devices to the working times. Thanks to it, it is possible to work in three different operating mode. Seal length:mm. 600 Max. length of garments:mm. 1650 Material to use:Polyethylen film, also with gussets

Wrapping machine constituted by tubular structure on which it is possible to hang the garment already pre-packaged in the upper part. The machine is equipped with sealing bar air that allows the lower welding of the hanging clothing. Sealing width 80 cm. with pneumatic closure bar. Built-in pressure regulator. The sealing is made by pneumatic closing of the bar. You can also change the height of welding in a practical and fast by pneumatic control. In the standard version the adjustment ranges of about 50 cm. On request it is possible to change the height of the weld. Operation: The operator hangs the dress already bagged the top and insert the edges of the bags in the sealing bars. Through the dedicated command adjusts the height of the sealing bar and closes. Operand button welding makes the closure of the envelope. The sealing cycle is indicated by a warning light and can be adjusted up to about 1. Pressure:5,5 bar Dimensions:810 x800x2005 mm Envelopes can be used in standard:Min 1300 max 1800 mm Stroke height adjustment:50 cm about Stroke welding cylinder:20 cm about Base height:12 cm Alimentation:220 volt